Dust-free hammer grinder has the characteristics of high quality, good performance, high efficiency and energy saving, and wide application. It is a must-chosen machine in some recycling production lines. It can effectively reduce dust pollution and comply with modern environmental protection concepts. It consists of a pulverization chamber, screen mesh, shell, base, pulley, induced draft fan, etc. The pulverization fineness can be adjusted according to the screen mesh.
The hammer grinder can handle a wide range of materials such as wood scraps, wood templates, bamboo, paper, corn straw, coconut huks, twigs, plastics, textile shreds, etc. The grinded materials are widely used as basic raw material of making paper, particleboard, fiberboard, non wood-based board and pulping paper making.
Hammer grinder mill is an efficient and multifunctional equipment, with good fineness, high quality and high efficiency. It is widely used in the production industries of wood, straw, fertilizer, pellet fuels, animal bedding and feeding, biomass coupled power plant, biogas power generation, biomass fuel, paper mill, etc.
Hammer grinder uses a high-speed rotating rotor to quickly crush materials, and its large body and droplet shaped design improve production efficiency and reduce circulation. The motor drives the rotor to rotate at high speed in the grinding chamber. The material is fed in from the upper feed port and is hit and impacted by the high-speed rotating hammers, gradually becoming small particles. Under the action of centrifugal force and airflow, the smaller particles are discharged through the screen, while the larger particles remain in the screen and continue to be hit and crushed by the hammers. It is an indispensable equipment in modern industrial production that can meet different particle size requirements by adjusting the screen size.
Tire debeader is specially designed to mechanically pull out the bead wires completely that are inside the sidewalls, high efficiency pull out in short time. Before the tires are sent to the next process tire shredder, they must pass through the tire debeading, which can make the finished product cleaner and ensure that the working blades of the shredder have a longer service life.
The motor drives the hydraulic system and the oil cylinder of the tire steel wire debeader, and the hook is connected to the pull rod of the oil cylinder. Due to the movement of the oil pump and the oil cylinder, the pull hook is reciprocated. Place the tire on the feeding mouth, extend the pull hook out of the feeding mouth, hook the inner steel part of tire ring, and then start the button. Due to the strong pulling force of the oil cylinder, the steel wire will be pulled out as a whole, and the sidewall part is caused to tear the rubber due to the action of the pulling force, thereby achieving the purpose of separating the steel wire from the tire.
Rubber granulator is specially designed for rubber granulation in the rubber recycling line as the third step process. The first and second steps were able to shred the tires into 10-20mm rubber chips, and then the granulator could further grind them into 1-7mm rubber crumb. The outlet size required can be adjusted, as there are different sizes of screens available to ensure more flexible production. The final product after our rubber granulator will be 99.9% rubber crumb without fiber and wire.
Our granulator also can be used for waste plastic, paper and cardboard. Different blades are suitable for different materials to meet your production needs.
