Model: JLTS1200D, JLTS1500D, JLTS2000D, JLTS2600D
Raw Material: Truck tire, bus tire, car tire, radial tire, rubber product, etc.
Outlet Material Sizes: 50-100mm
Tire shredder is a double shaft shredding machine used for pre processing of waste tire. Equipped with detachable blades, made of high hardness and anti-wear alloy. Easy to maintain and replace, low maintenance cost and long service life. Kowloon Machinery provides Complete Automatic Waste Tire Recycling Line, which can process waste tires into rubber granules or rubber powder, the output size can be adjusted according to customer needs.
Tire debeader is specially designed to mechanically pull out the bead wires completely that are inside the sidewalls, high efficiency pull out in short time. Before the tires are sent to the next process tire shredder, they must pass through the tire debeading, which can make the finished product cleaner and ensure that the working blades of the shredder have a longer service life.
Our tire debeader is remote controlled, and easy to operate. The motor drives the hydraulic system and the oil cylinder of the tire steel wire debeader, and the hook is connected to the pull rod of the oil cylinder. Due to the movement of the oil pump and the oil cylinder, the pull hook is reciprocated. Place the tire on the feeding mouth, extend the pull hook out of the feeding mouth, hook the inner steel part of tire ring, and then start the button. Due to the strong pulling force of the oil cylinder, the steel wire will be pulled out as a whole, thereby achieving the purpose of separating the steel wire from the tire.
Model: JLRS800, JLRS1000, JLRS1200, JLRS1500
Inlet Material: ≤50mm shredded tire pieces
Outlet Material: 10-15mm rubber granules
Tire Rasper is also called tire steel wire separator, it is designed to remove steel wire from the rubber tires with claw blade with teeth, and separate them via magnet separator above discharge conveyor, steel wire separating purity 98%. Raspers are a necessary piece of equipment for tire recycling, crushing rubber even further for future processing. It can process tire chips from the tire shredder into 10-15mm rubber granules.
Kowloon Machinery offer customized tire recycling solutions according to your requirements on input tyre type, production capacity, and output size. Each tire recycling equipment is heavy duty and extremely durable, built for processing tires and other rubber materials for a long time.
Model: JLSP800, JLSP1000, JLSP1200, JLSP1500
Inlet Material: 10-20 mm rubber granules
Outlet Material: ≤7 mm rubber granules
Rubber granulator is specially designed for rubber granulation in the rubber recycling line as the third step process. The first and second steps were able to shred the tires into 10-20mm rubber chips, and then the granulator could further grind them into 1-7mm rubber crumb. The outlet size required can be adjusted, as there are different sizes of screens available to ensure more flexible production. The final product after our rubber granulator will be 99.9% rubber crumb without fiber and wire.
Kowloon Machinery offer customized tire recycling solutions according to your requirements on input tyre type, production capacity, and output size. We have extensive project experience and welcome your inquiry!
Model: JLRM280
Inlet Material: 1-10 mm rubber granules
Outlet Material: 5-80 mesh rubber powder
Rubber powder making machine is a disc mill, its function is to grind rubber granules into fine rubber powder. It is equipped with inner water cooling system to reduce working temperature, therefore it owns ability to work 24 hours at room temperature. Two-disc structure, adjustable clearance between discs, various powder sizes between 5-80 mesh can be obtained. The rubber powder produced can be used in building materials, rubber products and other fields.
Kowloon Machinery provides complete automatic waste tire recycling line equipment. Welcome your inquiry!
Raw Material: OTR tires (diameter 1800mm – 4000mm)
Main Equipment: OTR Tire Bead Cutter, Bead Wire Separator, OTR Tire Hydraulic Cutter
OTR Waste Tire Recycling Machine is specially designed to process oversized construction machinery tires, engineering tires, large agricultural machinery tires, industrial and mining tires with diameters ranging from 1800mm to 4000mm, which are typically difficult to handle due to their large size and high steel content.
OTR waste tire recycling line provides an effective solution for processing large size tires while converting them into valuable rubber granules or powder. With flexible configurations and proven processing technology, we deliver reliable and customized OTR Tire Recycling Line solutions based on tire size, capacity and local situation of different customers. Contact us now for more information and latest quotation!
